Leica RTC360 3D Laser Scanner

Leica RTC360 3D reality capture solution empowers users to document and capture their environments in 3D, improving efficiency and productivity in the field and in the office through fast, simple-to-use, accurate, and portable hardware and software. The RTC360 3D laser scanner is the solution for professionals to manage project complexities with accurate and reliable 3D representations and discover the possibilities of any site

Leica ScanStation P40

Delivering highest quality 3D data and HDR imaging at an extremely fast scan rate of 1 mio points per second at ranges of up to 270 m. Unsurpassed range and angular accuracy paired with low range noise and survey-grade dual-axis compensation form the foundation for highly detailed 3D color point clouds mapped in realistic clarity

The Leica Nova TM50

Including an overview camera and a telescope camera with 30x magnification and autofocus. Nova TM50 meets the challenge of monitoring 24 hours a day, 7 days a week. Nova TM50 is one component of a unique monitoring solution which seamlessly integrates total stations, GNSS receivers and antennas, geotechnical sensors, software and IT communication infrastructures.

Leica SmartStation

For combined topographical and GPS surveys, we use the world’s first total station with integrated GNSS/GPS. This high performance total station has a powerful GNSS/GPS receiver, while the RTK determines the position to centimetre accuracy within a few seconds at ranges up to 50km from a reference station.

With less set-up time required and its general ease-of-use, the SmartStation is cost efficient through its increased productivity.


GEOTEC LLP uses always the right instrument for the right task.

The TPS1200+ total station which provides the best reflectorless EDM performance available in the world – a reflectorless range of 2000m, PinPoint accuracy of 2mm and laser dot size of 2cm/50m. It is more efficient and faster than any other one-person-total station and therefore more cost effective. Working with an improved Automatic Target Recognition (ATR) sensor, the TPS1200+ tracks and follows the prism with the highest degree of accuracy and reliability.

The Leica Flexline TS09Plus manual Total Station used mid to high accuracy applications in our scopes.  Wherever high-distance measurement accuracy is required, you can face to challenge of this demanding task with the TS09Plus with it’s Angle measurement accuracy of 1’’and distance measurement without reflector accuracy of2mm+2ppm.

Leica Viva TS11 combines a wide range of innovative products designed to meet the daily challenges for all positioning tasks with PinPoint EDM delivers the optimal balance of range, accuracy(1mm+1.5ppm), reliability, beam visibility, laser dot size and measurement time (1.0 seconds).

The simple yet powerful and versatile Leica Viva hardware and software innovations are redefining state-of-the-art technology to deliver maximum performance and productivity.

Leica DNA03

Experience shows that with Leica digital levels there is up to a 50% time saving when compared with conventional levels. The main reasons are the faster data capture as well as the shorter time and safer means of data processing.

For height measurements with 0.3 mm standard deviation per km double levelling (invar staff).

Leica GS18 T GNSS RTK Rover

Leica GS18 T is the world’s fastest and simplest-to-use GNSS smart antenna and RTK rover. Measure any point quicker and easier without needing to hold the pole vertical.

This latest technology and innovation combine GNSS and IMUs (inertial measurement units) to be the first true tilt compensation solution that is immune to magnetic disturbances and is calibration-free.

GNSS Leica Viva GS10

Leica Viva GS10 allowing easily to solve various geodetic problems of any complexity. In this unique product the company motto about accuracy and reliability is very earlier incarnate. Viva GS10 is capable to accept signals on 120 L1 and L2 channels. The unique Leica SmartTrack technologies + and Leica SmartCheck +, patented by the company, allow to carry out positioning with improbable speed and accuracy.

The GPS Leica Viva GS10 receiver can be easily modernized for reception signals of GPS L5, GLONASS, Galileo. The increase option of frequency of data updating, a record RINEX option, function of NMEA sending and other improvements, allowing to raise functionality of the tool is available.

Ground Penetrating Radar OKO‐2 & OKO-3

OKO-2 and OKO-3 GPR are designed to perform subsurface non-destructive radar surveys. It is a lightweight system that can operate in wide range of temperatures (-20°C – +50°C) and all weather conditions. Screen brightness and contrast provides visible picture under bright sunlight; low energy consumption permits to enlarge operating time without recharging. OKO-2 and OKO-3 radars can be used both indoors and outdoors.

Modification with 2 channels is also available, that permits sounding with 2 antenna units operating on different frequencies at the same time. OKO-2 and OKO-3 GPR are compatible with any antenna unit of the OKO series, no matter if they are shielded, unshielded or horn antennas. Remote operation is available with radio modem.


  • Autodesk Infrastructure Design Suite
  • Leica Cyclone – 3D Point Cloud Processing Software
  • Leica Infinity
  • Aveva PDMS
  • Hexagon Smart 3D
  • Hexagon 3Dreshaper

Autodesk Infrastructure Design Suite

Infrastructure Design Suite is a BIM for Infrastructure design solution that combines intelligent, model-based tools to help you gain more accurate, accessible, and actionable insight. With unique access to the Autodesk® infrastructure software portfolio, you can benefit throughout the execution and lifecycle of transportation, land, and water projects.

Leica Cyclone

Leica Geosystems HDS Cyclone — software modules provide point cloud users with the widest set of work process options for 3D laser scanning projects in engineering, surveying, construction and related applications.

Cyclone lets users take advantage of traverse, back-sight, and resection capabilities of the Leica laser scanners for more cost-effective as-built and topographic surveys and lets users create plant as-built models more efficiently from laser scans.